Tips for Evaporative coolers

Get Your Evaporative Cooling System Ready For The Summer Ahead.

WHAT COOLING SYSTEMS ARE VICTORIANS CHOOSING THIS SUMMER:

Victoria’s choice in cooling systems have become the ducted evaporative coolers as they can generally provide adequate cooling to the entire household. A popular choice for cooling smaller rooms and for providing spot cooling, Victorians seem to be going with window mounted and portable evaporative coolers.

HOW DOES AN EVAPORATIVE COOLER WORK?:

An Evaporative cooler works by drawing in the warm outside air via water filter pads. These pads are supplied with water found in a tank at the bottom on the unit. The water from these pads evaporates, drawing heat from the air and humidifies it. This air is now cooled and moist and is blown through out the home or space.

COST OF RUNNING AN EVAPORATIVE COOLING UNIT:

Both electricity and water are required to run an evaporative cooling unit. Approximate maximum hourly running costs for how much electricity it may use are provided below, however actual costs will depend on the cooling capacity of the unit and the fan speed that it is being run on.

  • portable units cost 2 to 3 cents per hour
  • window/wall-mounted units cost  6 to 7 cents per hour
  • ducted units (medium size) cost 12 to 28 cents per hour.

WATER CONSUMPTION FOR YOUR EVAPORATIVE COOLING UNIT:

The amount of water used is dependable on the amount of humidity that day and the fan speed that you have set your unit to. A portable unit may use up to approximately 4 litres an hour in comparison to a central system which can use up to 25 litres an hour.

A ducted evaporative cooler has to refresh its supply of water in order to ensure it doesn’t become too salty, so there are a range of water management systems being uses depending on the model you have got. Therefore we suggest that prior to purchasing a unit you ask about the water management system used and what it typically uses in water consumption per hour.

A range of water management systems are used by different brands/models. If you are purchasing a ducted evaporative cooler, ask about the water management system used and what the typical hourly water consumption is likely to be in your area.

WHAT SIZE EVAPORATIVE COOLER IS BEST FOR YOUR HOME?:

Different sized evaporative coolers are suited to different areas depending on the amount of airflow and the volume of the area which you are wanting to be cooled. The best thing for you to do prior to purchasing a unit is to seek an accurate sizing quote from either an installer or from your local retailer. They are trained to best consider your local humidity levels along with the size of your home or space.

TIPS FOR OPERATING AN EVAPORTIVE COOLER

  • Make sure all windows and doors are being kept open in rooms that are being cooled and ensure the opening is big enough to allow air to flow outside with ease. The effect of cooling will be reduced if there is insufficient openings and may put extra pressure on the fan.
  • Reduce heat gain by opening windows and doors on the opposite side of the house to the hot prevailing winds where possible
  • For units that have a timer, set it to switch off the system when cooling is not required for example in the early morning.
  • On days of high humidity, turn off the water supply to the cooler and run the fan only – this can also be quite effective on still humid evenings if the outside air has cooled down

If you have an questions or are interested in a quote please contact beOnd Plumbing on 1300 599 552.

 

 

 

ways to ensure you obtain the best drinking water for your homes

How To Ensure You Obtain The Best Drinking Water!

Did you know that it is estimate that each person requires access to a minimum of 20 to 50 liters of water per day for drinking, food preparation, and personal hygiene?

Polluted water isn’t just dirty, it’s deadly. Some 1.8 million people die every year of diseases like cholera. Tens of millions of others are seriously sickened by a host of water-related ailments—many of which are easily preventable.

Here are some ways to ensure you obtain the best drinking water for your homes…

Commercial Cleaners: Commercial cleaners are poured into the main supply pipe. Once you add the chemical additives, you must flush out your water before you start drinking it or bathing in it.
Be aware that chemical cleaners have drawbacks. The strong chemicals used to rid pipes of build up can also begin to deteriorate the pipes themselves. Constant use will slowly eat away at the pipes, thus causing replacement and possible water damage repair due to leaks.
Water Softeners: You can keep your water pipes free of minerals by installing a water softener that will circulate the water through a pump that has either a potassium or a salt filter to trap the minerals. You must continually add new salt to the system and clean the filter, but you will see a drastic reduction in the minerals in the water.
Lime Removal: Hot water pipes are very susceptible to lime build up. The hot water is the actual cause of the problem. The water will dissolve the lime into a state where it flows freely in the water. When it cools off, any lime left will settle in pipes or the hot water heater, causing a decrease in water flow or a clog.
If you find that this is the problem, empty half of your hot water heater and simply add some lime remover to it. Refill the hot water tank and then let it set for a few minutes. Let the hot water run through all your faucets until the water is clear and free of any bubbles and foam. If you have water that is heavy in lime, you will probably need to repeat this process every few months depending on how much hot water you use.
Instal a Filter Tap: Under sink water filters are a popular choice because they provide good filtration and water flow, and they do not clutter the countertop or sink area. A good system can remove contaminants such as arsenic, nitrates, sodium, copper and lead, some organic chemicals, and the municipal additive fluoride. This can be extremely cost effect especially for people who find themselves purchasing bottled water, as the system provides a constant supply of beautiful, clean water right at your kitchen sink. It is important to have a qualified plumber instal your filtration system as it could affect your homes entire water supply.

 

For more information or for quote on a filter tap in your home please feel free to contact beOnd Plumbing on 1300 599 529.

Why hire a licensed plumber?

Why Hire A Licensed Plumber?

Why hire a licensed plumber?

A licensed plumber ensures you that the plumber has a certificate and

  • Meets the expectations and the State’s credentials and education requirements.
  • Has passed the relevant exams required for a plumbing license.
  • Has legal authorisation to conduct plumbing services.
  • Is liable for violating the rules set by the licensing entity.
  • Ensures that the job is done right the first time.

The risks of NOT hiring a licensed plumber…

  • The contractor may not have the education, training or skill required to carry out the work.
  • The uncertainty that the work may not meet the standards.
  • The quality of the work may be jeopardised.
  • The risk of broken contracts and fraud.
  • If a plumber hasn’t bothered to get a license, chances are they didn’t bother with insurance either. A home owner can be liable for all sorts of costs including hospital bills if anyone is inured during the work.

The list could go on and on but there you have some really good points when hiring the right person for the job. Remember that it could cost you double to have something fixed that wasn’t done correctly the first time. And lets not forget that poor quality work could lead to accidents and injuries within our homes and around our families.

For more information or to get a quote feel free to contact us on 1300 599 529 for all your plumbing needs.

If you have a story of plumbing work that went wrong we’d love to hear it… Type it into the comment section below!

 

One Dead due to Suspected Carbon Monoxide Poisoning

One Dead In Suspected Carbon Monoxide Poisoning In Churchill

One person has died and second has been taken to hospital because of suspected carbon monoxide poisoning at home in Victoria’s Latrobe Valley.
Police are investigating the incident involving a man and woman in Churchill, near Morwell after a family member called them to the house.
They do not believe that the death was suspicious.
The man, who is aged is his 60s, was found dead at the scene and the woman, also in her 60s, was moved to hospital for observation.
Advertisement

She remained at the Latrobe Regional Hospital in a stable condition on Thursday night.
The pair were found inside the home in Graduation Place at about 3.40pm on Wednesday afternoon.
Police will prepare a report for the Coroner.
Carbon monoxide is a gas that can rise to lethal levels inside houses when possessions such as heaters and portable generators become faulty.
Cars left running in attached garages are another hazard.
Two Shepparton boys, eight-year-old Chase and six-year-old Tyler Robinson, died from carbon monoxide leaking from a gas heater at their rented home in 2010.

Please have your heaters checked by a qualified technician this winter by calling beOnd Plumbing on 1300 599 529.

 

From the 1st of May to the 7th of May it is Carbon Monoxide Awareness Week.

Carbon Monoxide Awareness Week 2016

From the 1st of May to the 7th of May it is Carbon Monoxide Awareness Week. And through out this week many local businesses, schools and organizations including ourselves have teamed up with the Chase and Tyler Foundation to raise awareness of carbon monoxide poisoning across Australia and to advise on preventative measures that people can take to reduce the risk.

The Chase & Tyler Foundation are a non for profit, national group who are doing all that they can to reduce the numbers of death, injuries and illness caused by carbon monoxide in Australia every year. Chase & Tyler at the ages of 8 and 6, died from carbon monoxide poisoning from their unserviced gas heater in their rental home in 2010. Since then the Chase & Tyler Foundation have worked extremely hard to eliminate accidental carbon monoxide poisoning throughout Australia by increased awareness, preventative measures, regulation, training and research. Their vision is for zero deaths or injury from accidental Carbon Monoxide poisoning in Australia, and they do in everything in their power to create the kind of awareness to insure this for our futures.

Carbon monoxide (CO) is produced by the incomplete burning of various fuels, including coal, wood, charcoal, oil, kerosene, propane, and natural gas. It cannot be seen, felt, smelt or touch hence its name ‘The Silent Killer’. It is something that can effect both animals and people and those most susceptible to its effects are usually pregnant women, unborn babies, children, the elderly and people with chronic heart disease, anemia, or respiratory problems. Carbon monoxide can be produced by any appliances that use gas, oil, kerosene, or wood. So as you can see most of us are at risk on a daily basis.

Preventative measures is the best way to keep your families safe this winter and here are some ways to go about it:
– Service all fuel-burning appliances regularly as per the manufacturer’s recommendation or at a minimum of once every two years as recommended by Energy Safe Victoria & the Victorian Building Authority.
– Sweep and inspect chimneys and flues.
– Ensure there is adequate ventilation in the room you are using such appliances
– Call a certified professional to inspect, clean, and tune up the central heating system and make any necessary repairs.
– Have a qualified gasfitter install a high standard audible carbon monoxide alarm outside sleeping and living areas.
– Dont bring an outdoor fuel-burning appliance inside your home/tent or caravan.
– Dont leave your car’s engine running idle in an enclosed space such as your garage.

There are symptoms to be aware of within the home that can alert you of carbon monoxide poisoning such as dizziness, fatigue, head aches, nausea, breathlessness, chest or stomach pain, loss of consciousness, visual disturbances and erratic behavior. Depending on ones age, health and the duration of the exposures the effects of carbon monoxide can vary considerably. It can vary from difficultly breathing, impaired judgment and memory, damage to the nervous system to cardiac trauma, brain damage, coma or even death as we have sadly seen with young Chase and Tyler.

Generally the effects of carbon monoxide are reversible but there have been instances were significant overexposure have lead to permanent damage effecting the nervous system.

Please feel free to contact Carbon Monoxide Testing Australia on 1300 599 529 to have your house or office tested for this silent killer or for any questions you may have regarding carbon monoxide poisoning.

The Importance Of Servicing and Maintaining Your Heaters!

The Importance Of Servicing and Maintaining Your Heaters!

Truth is neglecting to service and maintain your heater can be a life or death situation.
Don’t be another statistic and ensure the safety of your family today.

As winter is soon approaching is it so important to remember to check that our heaters and fires are working correctly before we turn them back on for the cooler months ahead. Regardless of the type of heating system you use it is imperative that you check them before, after and even during the months in which they are regularly used. Our heaters can produce carbon monoxide, a very harmful poison which can lead to unconsciousness and even cause death.

There are ways of maintaining the upkeep of our heating systems on our own such as clearing them of dust and dirt and using your vacuum to eliminate any obstructions, however remember never to use any flammable liquid and to leave the filters and fans to fulled licensed professionals who will provide you with a certificate once it is satisfactory.

If you have a electic heating system you must have a fully qualified professional install it and maintaining it throughout its lifespan. Checking faulty wiring yourself can led to electrocution or even death, so please leave it to the professionals. This will also avoid the risk of electrical fires.

Signs that your heating system may not be functioning correctly

– Headaches
– Weakness
– Dizziness
– Shortness of breath
– Pain to the chest
– Sleepy
– Nauseous

If you are experiencing any of the following issues with your gas heater, turn it off immediately and call a professional (qualified gas fitter) and have it tested before putting it back on:
– the pilot light goes out unexpectedly, or ‘pops’ or ‘bangs’ when lighting
– Sparks coming from the plug or on off button
– there is a yellow or sooty flame (unless it is a decorative gas log fire)
– signs of heat damage such as discoloration of the walls or heater panels
– the walls become too hot to touch while the heater is on
– there are soot stains around the heater.

Lastly just remember that it is your family and loved ones lives at stake. If your heating system is old have it replaced and always have a qualified fitter install and maintain your services. When is doubt always turn the system off, open all doors and windows and call a call a professional.

What Do You Know About Smoke Alarms?

What Do You Know About Smoke Alarms?

Did you know that if you don’t have a working smoke alarm installed in your home, and a fire occurs:
– You are 57 per cent more likely to suffer property loss and damage
– You are 26 per cent more likely to suffer serious injuries
– You are four times more likely to die

Did you also know that smoke alarms are compulsory in all homes and have been since August 1997?

Victorian law states that smoke alarms (complying with Australian standards AS 3786) must be installed in all homes, units, flats and townhouses. It is the legal responsibility of all owners and landlords to install working smoke alarms.
Residential homes constructed before 1st August 1997 need only 9 volt battery powered smoke alarms installed. Residential homes constructed after 1st August 1997 must have smoke alarms connected to 240 volt mains power. In addition a backup battery must be installed in the smoke alarm.

Are you aware that all smoke alarms:
– Must contain a battery
– Need to be tested regularly
– Need to be replaced after 10 years

Do you know where to locate smoke alarms in your home?
– Smoke alarms must be located between each bedroom area and the rest of the house.
– In addition inside any bedroom where someone sleeps with the door shut
– In a two storey home a smoke alarm is required on every storey, located in the path that people will use to evacuate

Do you know how to test and maintain your smoke alarms?
– Monthly: Test by pressing the test button with a broom handle
– Yearly: Vacuum around your smoke alarm vents
– Yearly: Replace your 9 volt battery each year at the end of daylight saving

Did you know that it is the tenant’s responsibility t
– Test the smoke alarm every month to make sure it is working
– Contact their agent/Landlord if the smoke alarm is not working
– Contact their agent/landlord if the smoke alarm omits an occasional chirping noise as the battery or smoke alarm is faulty

Lastly it is extremely important to remember that when you’re asleep you lose your sense of smell. A smoke alarm is your electronic nose. It will alert you if there is smoke from a fire. A small fire can grow to involve an entire room in two to three minutes. A smoke alarm provides early warning and time to escape.

Top 10 Suburbs with Blocked Drains in Melbourne

Top 10 Suburbs With Blocked Drains In Melbourne!

According to the RACV the top 10 suburbs that require a plumber due to blockages in Melbourne are:
St Kilda East
Reservoir
Box Hill
Burwood
Balwyn North
Heathmont
Caulfield North
Carrum Downs
Tarneit
Blackburn

RACV has got to the bottom of why some suburbs have the most blocked drains, toilets and pipes.
St Kilda East is RACV’s busiest suburb for blockages, and Reservoir second, based on the number of members using Emergency Home Assist and the number of incidents.
In St Kilda and Reservoir, RACV Emergency Home Assist plumber Zachary Arthur says the sewers are older than newer suburbs they serve, so blockages can be common.
Older sewers that are prone to blockages are also common in Box Hill, Burwood, Balwyn, Caulfield and older suburbs in general.
Some of the main preventable causes of blockages include oils and fats, wet wipes and sanitary products that end up in the drains.
“The more careful you are the less likely it is to block up,” Zachary says.

World Plumbing Day is observed on March 11 each year.

World Plumbing Day 2016

WORLD PLUMBING DAY | 11 MARCH

The United Nations declared 2005-2015 the International Decade for Action “Water for Life”, setting a world agenda that focuses increased attention on water-related issues. This initiative is of extraordinary importance in a world where preventable diseases related to water and sanitation claim the lives of about 3.1 million people per year, most of them children less than 5 years old. Of these, about 1.6 million people die each year of diarrheal diseases associated with lack of safe drinking water and adequate sanitation.

By including access to a safe drinking water supply and sanitation in these international goals, the world community proposes 97 million additional people annually will have access to drinking-water services and 138 million additional people access to sanitation services through 2015. Working within the spirit of these initiatives the World Health Organization and the World Plumbing Council developed the “Health Aspects of Plumbing” publication noting that sustainable health, especially for children, is not possible without access to safe drinking water and basic sanitation facilities.

CLEAN WATER IS NOT A LUXURY

“Health Aspects of Plumbing” is a comprehensive and substantive examination of the design, installation and maintenance of effective plumbing systems. It recommends a number of plumbing system design and installation specifications that have demonstrated their validity over years of existence and discusses the microbiological, chemical, physical and financial risks associated with plumbing.

Published by the World Health Organization and the World Plumbing Council, the book is dedicated to the achievement of the best possible plumbing practices to ensure the highest health benefits from the use of sound plumbing practices. It is a tremendous resource for administrators and plumbers, especially those in countries or areas in the early stages of introducing effective plumbing systems.

ENVIRONMENTAL ASPECTS OF PLUMBING

Among the objectives upon which the World Plumbing Council was founded is promoting awareness of the plumbing industry’s role in protecting the environment by providing safe fresh water and sanitation through proper management, care, reuse and conservation of natural resources. The industry also plays a major role in the installation of technologies that address concerns about the depletion of fossil fuels and work toward reducing harmful emissions.

Fresh water is in finite supply on Earth and as the key to life is without question our planet’s most precious natural resource. The plumbing industry recognizes the tenuous balance mankind must maintain to guarantee its very existence and embraces efforts to ensure we are preserving every drop possible. In many countries, the plumbing industry also contributes significantly to the development and installation of heating systems and recognizes that man’s still increasing reliance upon of fossil fuels cannot continue without challenge.

These efforts range from simple household changes to wide scale government sponsored endeavors. Highlights include:

WATER REUSE

The plumbing industry finds itself at the middle of three methods of water reuse that are rapidly increasing in popularity all over the world: rainwater harvesting, grey water systems and sewage water recycling.

Rainwater harvesting is pretty simple at its core — the capture and storage of rainwater that would otherwise return to the water table through natural means — but the plumbing industry is hard at work developing equipment and methods to increase its efficiency and usage.

Grey water systems can range from something as simple as redirecting sink drain water to a toilet tank for flushing to city wide systems used to water greenbelts and water tolerant landscaping.

Sewage water recycling is the filtration, treatment and natural return to the water table of water used to remove sewage from our homes and businesses. Municipalities are investing heavily in these systems that literally and figuratively remove the waste from our water.

LIMITING WATER USE

A host of water efficient products, from low-flow showerheads to waterless urinals are flooding the consumer market as plumbing manufacturers have embraced the conservation movement as a result of government rebate programs and mandatory efficiency standards.

Code development organizations have developed new “Green” standards for plumbing systems and various industry associations have introduced new training and education programs to increase conservation efforts among contractors and installers.

DESALINATION

Researchers continue to discover and develop newer, even more efficient means for converting salt water to drinkable fresh water, a process that has previously been cost prohibitive and detrimental to the environment. Methods such as sub-sand intake, reverse osmosis filtration and renewable energy generation to power the pumps have all contributed to the increased viability of desalination today.

SOLAR WATER HEATING

New technologies for solar collectors, storage and delivery of hot water offer a more environmentally friendly alternative to traditional electrical and gas powered systems.

GEOTHERMAL AND AIR-SOURCE HEAT PUMPS

A geothermal heat pump (or ground source heat pump) is a central heating and/or cooling system that pumps heat to or from the ground. It uses the earth as a heat source (in the winter) or a heat sink (in the summer). This design takes advantage of the moderate temperatures in the ground to boost efficiency and reduce the operational costs of heating and cooling systems

An air-source heat pump uses outside air as a heat source or heat sink. A compressor, condenser and refrigerant system are used to absorb heat at one place and release it at another. When properly installed, an air-source heat pump can deliver one-and-a-half to three times more heat energy to a home than the electrical energy it consumes. This is possible because a heat pump moves heat rather than converting it from a fuel, like in combustion heating systems.

ENERGY EFFICIENCY

Manufacturers are developing water heaters and appliances that not only use less water, but also require less power to operate them. From high efficiency water heaters to Energy Star-rated dishwashers, washing machines, boilers and room air conditioners, these products are much greener than models produced even as recently as five years earlier.

THE FUTURE

By embracing these new technologies and methods, the plumbing industry has made and will continue to make historic inroads toward increased sustainability by striking a harmonic balance between cost, energy consumption and conservation. The industry takes water efficiency and preservation seriously and promotes it to consumers within their homes and businesses and among their elected leaders. Long entrenched habits of misuse of our clean and inexpensive water supply have threatened its sustainability and the plumbing industry recognizes the leadership role it must play in changing those habits for the betterment of mankind.

The World Plumbing Council do an incredible job uniting the world plumbing industry and promoting the role of plumbing in improving health and safeguarding the environment.

HAPPY WORLD PLUMBING DAY EVERYONE

Hot Water Service

Your Hot Water Service On the Brink? No Hot Water? Or See Orange/Brownish Water?

If your current hot water service doesn’t quite heat up like it used too or the unit itself is 10+ years old, it may be time to strongly consider a replacement or upgrade to avoid any potential damages… but more importantly the inconvenience of having no hot water.

At beOnd Plumbing we specialise in the service, repairs, installation and replacement of all Electric, Solar and Gas Hot Water Systems in and around the Melbourne Metropolitan area. All our work is fully guaranteed and performed by Licenced Plumbers and Gas Fitters who pose a huge array of knowledge.

Our emergency service allows beOnd Plumbing to be contactable 24 hours a day 7 days a week. The company has reliable and qualified staff strategically based in Northern, Southern, Eastern, City Regions and Western areas.

We work closely with our key suppliers to ensure you are getting the best quality products on the market at competitive prices.

We provide replacements, repairs, service and installation for all brands and models.

To be redirected to our Hot Water Service pricing and specials page please click here http://www.beondplumbing.com.au/plumbing-products-and-services/hot-water-services/ or feel free to contact our team today on 1300 599 529.